ACCURACY OF ELECTRONIC MEASUREMENTS IN INTERNAL COMBUSTION ENGINE DEVELOPMENT
Published by The Institution Of Mechanical Engineers
in 1966
- Categorised in:
- SCIENCE AND TECHNOLOGY
- ENGINEERING
- ENGINES
ACCURACY OF ELECTRONIC MEASUREMENTS IN INTERNAL COMBUSTION ENGINE DEVELOPMENT
Stock no. 814372
1st.
1966.
Hardback.
Large format.
Slightly better than very good condition in a very good dustwrapper.
the Institution of Mechanical Engineers. Proceedings 1965-66. Volume 180. Part 3G. Papers from a symposium held in January 1966. Large format. Grey cloth boards, gilt title to spine. B/w photos. B/w illustrations. vii and 161 pages including index. A nice, clean copy. Orange pictorial dustwrapper is lightly rubbed at edges, is creased to lower spine edge with a closed tear, and is faded to spine.
Front cover
Contents
- Introduction
- SESSION 1:
- Paper 1: Measurement and recording of transient pressures in unsteady flow
- Paper 2: Accuracy in cylinder pressure measurement
- Paper 3: Measurement of total head pressures in an unsteady flow of a compressible fluid in a duct
- Discussion
- SESSION 2:
- Paper 4: Instruments unsed in the development of diesel engines
- Paper 5: Electronics applied to medium-speed engines
- Paper 6. Electronic instrumentation techniques in the development of pistons and rings
- Discussion
- SESSION 3:
- Paper 7: Accuracy of and representative results obtained with an infra-red pyrometer measuring compression temperatures
- Paper 8: Gas chromatography for the analysis of exhaust gases
- Paper 9: Velocity and rate of flow measurements in internal combustion engines
- Paper 10: The rapid estimation of transient response of a cascade of instrument elements
- Discussion