STEPPING MOTORS AND THEIR MICROPROCESSOR CONTROLS
Written by Takashi Kenjo
Published by Clarendon Press
in 1984
ISBN: 0198593392
- Categorised in:
- SCIENCE AND TECHNOLOGY
- ELECTRONICS
- ENGINEERING
STEPPING MOTORS AND THEIR MICROPROCESSOR CONTROLS
Written by Takashi Kenjo.
Stock no. 1707667
1990.
Softcover.
Very good condition.
Monographs in Electrical and Electronic Engineering 16. A brief history as well as the theory, terminology, control systems, and likely applications associated with stepping motors. Red & blue cardwraps. B/w diagrams and charts. viii and 244 pages including index. ISBN: 0198593392. 'DAMAGED' stamp to colophon page although a flick through does not show any damage... Very slight fading to spine. Edges lightly rubbed. Text block a little grubby. Pencil erasure and creasing to top corner of front fly-leaf. Contents otherwise clean.
Front cover
Contents
- 1. Introduction and Historical Survey
- 2. Outline of Modern Stepping Motors
- 3. Theory of Electromagnets and Structure of Stepping Motors
- 4. Fundamental Theory of the Dynamic Characteristics of Stepping Motors
- 5. Drive System and Circuitry for Open-loop Control of Stepping Motors
- 6. Torque Characteristics and Pulse Intervals - Measurement and Use in System Design
- 7. Closed-loop Control of Stepping Motors
- 8. Application of Stepping Motors