PRINCIPLES OF COMBUSTION IN THE STEAM BOILER FURNACE
Written by Arthur D. Pratt.
Stock no. 1831599
Published by Babcock and Wilcox. 1936. Very good condition.

This guide translates complex combustion theory into practical methods you can apply in real-world boiler work, helping you predict flames, heat transfer, and exhaust behavior with confidence. Revised edition. Brown cloth, black titles. 112 pages including index. Top & tail of spine lightly worn, boards a little grubby. Foxing to contents and some grubby fingering marks. Binding is tight.

JAMES WATT: CRAFTSMAN & ENGINEER
Written by H.W. Dickinson.
Stock no. 1831597
Published by Cambridge University Press. 1st 1935. Almost very good condition.

This book examines the career of James Watt as a craftsman and engineer, rather than offering a purely narrative biography. Watt began his life as a maker of mathematical instruments, and throughout his working life enjoyed the challenge of such skilled work. Red cloth, gilt titles. 12 b/w plates and numerous b/w illustrations. xvi and 207 pages including index. Spine sunned/browned iwth some foxing. Boards are faded, grubby and foxed. Text block browned with foxing, foxing bleeding on to page margins. Endpapers a little browned and grubby. A few foxspots to contents.

A SHORT HISTORY OF THE STEAM ENGINE
Written by H.W. Dickinson.
Stock no. 1831596
Published by Cambridge University Press. 1st 1938. Almost very good condition.

This volume details the steam engine as the most dynamic factor in the Industrial Revolution, freeing humanity from their age-long dependence upon the power of water, wind, and animals, or of their own muscles. Red cloth boards, gilt title to spine. 11 b/w plates plus b/w illustrations. xvi and 255 pages including index. Spne is heavily sunned/faded with a few marks and light shelf wear to top & tail of spine. Fading to edges of rear boad and a few marks. Text block browned with some foxing. Endpapers browned, some foxing present to contents.

JOHN SMEATON
Written by A.W. Skempton.
Stock no. 1830766
Published by Thomas Telford. 1st 1981. Slightly better than very good condition in a very good dustwrapper.

Biography of the famous engineer who was involved with everything from mills, bridges and fen drainage to the Eddystone Lighthouse. Brown cloth, gilt title to spine. B/w illustrations. 291 pages including index. ISBN: 007277088X. Boards clean. Personal gift inscription in ink to front endpaper. Else contents clean. White pictorial dustwrapper is lightly browned, faded to spine and a little scuffed.

MATTHEW MURRAY PIONEER ENGINEER: RECORDS FROM 1765 TO 1826
Written by E. Kilburn Scott.
Stock no. 1829124
Published by Edwin Jowett. 1st 1928. Very good condition.

Edited by Scott. Matthew Murray was an English steam engine and machine tool manufacturer. Brown cardwraps. B/w plates. 132 pages including subscribers list to rear. Top of spine worn and slightly frayed. Tiny piece of lower corner of rear cover torn off. Text block browned. Page 11/12 vertical margin is lightly creased and lightly torn with no loss. Contents otherwise clean.

BUILDING THE "VICTORIA" A 19TH CENTURY STEAM ENGINE: CONSTRUCTIONAL DETAILS
Written by Andrew Smith.
Stock no. 1327474
Published by Model And Allied Publications. 1982. Nearly fine condition.

Revised edition. Green cardwraps. B/w photos and diagrams. ISBN: 0852427735. Minimal rubbing to cover edges. Contents fine.

THE BOOK OF THE A4 PACIFICS PHOTOGRAPHIC ACCOMPANIMENT No.2
No author listed.
Stock no. 1327235
Published by Irwell Press. 1st 2006. Nearly fine condition.

A4 locomotives. Large format. Pictorial cardwraps. B/w photos. ISBN: 1903266653. Minimal rubbing to corners else a fine copy (pencil price/stock markings to first page).

STATIONARY STEAM ENGINE MAKERS VOLUME 1 (LANDMARK COLLECTOR'S LIBRARY)
Written by George Watkins; A.P. Woolrich.
Stock no. 1326690
Published by Landmark Publishing. 1st 2006. Nearly fine condition in a nearly fine dustwrapper.

Illustrations, photographs and descriptions of stationary steam engine makers. Red boards, gilt title to spine. B/w photos and illustrations. ISBN: 1843062003. Pictorial dustwrapper is lightly scuffed and slightly faded to spine.

BUILDING THE "VICTORIA" A 19TH CENTURY STEAM ENGINE: CONSTRUCTIONAL DETAILS
Written by Andrew Smith.
Stock no. 1825055
Published by Model And Allied Publications. 1st thus 1982. Very good condition.

Revised edition. Green cardwraps. B/w photos and diagrams. ISBN: 0852427735. Covers browned, rear cover has slight surface loss. Contents browned else clean.

THE TRACTION ENGINE COMPANION
Written by Peter Haining.
Stock no. 1824877
Published by Robert Hale. 1st 1983. Slightly better than very good condition in a very good dustwrapper.

Red cloth, silver titles. B/w photos. The development and manufacture of traction engines from the 1850's. ISBN: 0709010214. Minor foxing and browning to text block else clean. Pictorial dustwrapper is rubbed at corners and browned to rear panel.

NENE VALLEY RAILWAY A JOURNEY BY STEAM
Written by Nathan Wilson.
Stock no. 2139488
Published by Mainline & Maritime Ltd. 1st 2020. Fine condition.

Square format. Glazed pictorial boards. Colour photos. Stsndard Gauge Album No. 1. ISBN: 9781900340687.

THE END OF A REVOLUTION: THE LAST DAYS OF STATIONARY STEAM
Written by Colin Bowden.
Stock no. 1823409
Published by Landmark Publishing. 1st 2008. Fine condition in a fine dustwrapper.

Landmark Collector's Library. The reciprocating steam engine as a source of industrial power almost completely disappeared during the final years of the twentieth century. This book illustrates some of the last of those engines still working, and others which remained on site, out of use or derelict. Red cloth boards, gilt title to spine. B/w photos. ISBN: 9781843063520. A review copy with press release present.